Tuesday, November 24, 2015

Christmas Advent Calendar


You know those chocolate Advent calendars? Well they are great and all but wouldn’t it be better if you could make your own? I will go step by step and show you how to make your own amazing Christmas Advent calendar! YAY!
Materials:           
Metal sheet as your backdrop (You can even use a metal flat cookie sheet)
Tin cans (we got our from pick your plum)
Triple pack of PenBlades (DUH)
Lots of Christmas Craft paper
Sticker Numbers and letters (countdown and the letters December)
A Cricut (If you don’t have one, you can still do it! Just give yourself more time)
Glue dots or strips
Washi tape (not totally necessary)
Ribbon
Magnets
Hot Glue

Once you have your base measure it out and see how many squares you can fit across it. Mine was big enough I could fit 5 down and 5 across. Yes, you’ll need to do all 25 days! I was lucky enough to have 25 different colored/patterned papers. But please, make it your own! Be creative! 
Create a template for your squares depending on how many and how big you can make them to fit on your backdrop. Then whatever tins you have trace those and make a template for your circles. They also have square tins too. So take your pick or get whatever you can find.
 

Use your template and your #11 PenBlade to cut your squares and then your #10 or #15 to cut your circles. With your tins that you get, trace that and just have the whole circle cover the container.

With my card stock I cut the square and circle on the same page right next to each other. Use the #11 blade for your squares and the #15 or #10 for your circles. Those have an easier time with curves.

Once they are all cut out, glue the circles onto your containers using the glue dots or strips. Hot glue could work but it will make your paper uneven.

Then place your squares however you would like them and use the glue strips attach them to the base.

Next I used Washi tape to make a grid line. It breaks it up a little nicer and adds sparkle!

Now grab your magnets and hot glue those to the back of your tins and let those sit. It’s surprising how long it takes a magnet and hot glue and metal to all stick together.
So now you have your base finished and your tins almost finished. Now for the top DECEMBER part. You have a few options. 1. You can buy some blank tags and add your letters to them or 2. You can cut out your own tags.
All right once you have your tags cut, place your sticky letters that you got before onto the tags and then grab some ribbon and thread it through. Then glue strip those on your backdrop as well. All right, now stick everything in its place. Add your magnetized tins to wherever it looks good and then you’ll add your sticky day numbers to each tin. These stickers were a pain in the butt! So I used the #10 blade to help get the stickers to peal from the sheet and strategically place them straight on the tins.

 Well, Congrats! Now you have your Christmas Advent Calendar!

So cute I know.

Soon to come is a list of things you can put inside your tins!

Wednesday, November 18, 2015

M.I.C.K.E.Y M.O.U.S.E

In honor of mickey mouses birthday I have decided to make a super easy craft for your little girls hair! Its seriously so easy. 

The things you will need are:
one sheet of black felt
hot glue
a barrette

See that? How simple is that list? Okay well you also need to find some circular shapes around the house to use as a template.  So go find an circular object that is about 1in. in diameter and another with about a half in. in diameter. The big one will be the head, the little one will become Mickey's ears. 

Trace 4 head sized pieces on your felt and 8 ear sized pieces from the felt.  Once they are all traced begin to cut them out. The easiest way I found was using a PenBlade. The number #11 was my favorite for this. It is able to cut through felt so easily. You'll see. 

Alright now for the instructions:
  1. Grab a head circle and place a drop of glue in the center then fold the circle in half
  2. lay a different head circle flat and glue the half circle you just made on half of the flat circle
  3. Grab a third head circle, glue in center, fold in half, then glue in center of the half and fold in half again. (should make a quartered circle)
  4.  Place a glue drop on the center of the flat head circle with the half head attatched, and stick the quartered circle in the center so the folds stick up
  5. Glue your last head as you did in Step 1 and glue on the other side of the quartered circle as you did in step 2.
  6. You will Repeat steps 1-5 for the ear circles.
  7. glue an ear to each side of the head
  8. Now glue your Mickey Mouse to the barrette
 
Boom! Cuteness has arrived!! It may sound a little complicated but just read the instructions a lot and you'll be fine. Now your girl or even yourself can wear a cute little mickey mouse hair barrette anytime you want!

Sunday, November 15, 2015

Cleaning that fridge of yours!


Happy national Fridge Cleaning Day!

Please come forward if you created this day! I would like a word with you! Seriously though, who created this day?! I want to ignore this day like the plague. But I’m sure if I didn’t clean my fridge it would probably be able to cause the plague.  Cleaning your fridge may seem like a daunting task but fear not! This blog post will save you!  

Alright So first off give your fridge a break! You think YOU never get a break? Your fridge really doesn’t! So lets give it a break while we clean it.
Get a cooler and place all your contents into it, Make sure they say cold! While your taking everything out look at all of your food! 

Go through these questions as your place each thing into your cooler:
Has it expired?
Does it smell funny?
Are you really going to use it?

Then find your circuit breaker or fuse box and flip it off. Your fridge will thank you later.
Get the shelves and drawers at a good room temperature before you wash them.

First things first, DO NOT USE SOAP. The scent can stay behind and then your food will absorb it...Gross.  So mix 2 tablespoons of baking soda and 1 quart hot water. Grab a sponge, a NEW sponge and start rubbing down the entire fridge. If you have those annoying spots just get some of the mixture and layer it on soon it will crack off. If it doesn’t try a little clump of toothpaste!

Clean the walls and the door. Don’t forget the shelf seams and the rubber door seal!

Make sure everything is dry. The drawers, shelves, and walls!
Find the water filter. You should be changing this every 6 months. If you’re a slacker like me it happens when I do this fridge cleaning once a year! So find it and replace it.

When you’re ready, turn your fridge back on. Make sure it’s a good 37 degrees.  As you are putting everything back into your fridge get a damp towel and whip down every bottle as it goes back to its place!
BOOM! Congrats! Your fridge is now clean. Easy huh? Well just make sure you do it every year for a good ol’ deep clean.

Tuesday, November 3, 2015

We Give YOU thanks

Alright All. I finally decided to finish the We Give thanks project. You all helped me decide what background and then I went to the store, grabbed a frame and then cut it down. Whala!? Is that how you spell it? Anyways, like what ya see? I do too! Here are the instructions again on how to make it just in case you are too lazy to go to our previous post. But really, Just go look...
Fine. Here you go.

Come up with a saying. It could be simple with 3 words or very very simple with 1 word or you can create a sentence. But beware! Your cursive has to be on point! Ha I lied. I do a mix of cursive/normal curly letters. But you DO need to have all the letters connect! Oh and try to avoid the letter i. It’s a pain because of the stupid dot. So some examples: thankful, give thanks, we give thanks (this is the one I used), we are thankful, blah blah blah create your own! Realizing as I typed this I chose the only one with the letter i. If you can figure out a way later tell me!
Okay, grab a piece of construction paper and computer paper and make sure they are the same size. 
Give them each a one-inch boarder around the sides.
Then grab your saying and write it out. Have the letters connect all the way across. Once you’ve got your letters laid out just go and make ‘em fat! Nice and thick letters=easier slicing. 
Take your construction paper and have the good side facing the table and the “ugly” side facing you. Lay down your pencil writing of your saying kissing the ugly side. Make sure they are centered and straight. Then grab a pencil and scribble over the lettering that way the pencil rubs off onto your “ugly” side of the construction paper. It will be backwards and this is what we want!
Once it is all rubbed off, grab your cutting matt and start. You basically trace your wording and deleting the background image. Be calm and go s   l   o   w. If you mess up, your cute little project will be not so cute. There you go! Just use the #15 blade to go around the curves and when you get to a sharp little corner use the #11 blade and make a precise cut. You’ll be fine. Trust me.